• Clean the product you are applying the transfer to thoroughly.

• Use a squeegee or plastic card to firmly press the stickers from the back. This will ensure it is firmly adhered to the carrier sheet

• Peel the transfer off of the backing, ensuring all pieces lift off evenly

• Position the transfer and stick it onto the product.

• Once the transfer is applied, remove bubbles or wrinkles with firm pressure using a squeegee or plastic card.

• After you smoothed the transfer out, apply pressure using your fingers to adhere evenly.

• Finally, peel off the clear layer on the front of your design diagonally.

Note: If the transfer pulls up with the clear layer, push it back down and firmly press it back into place before trying to remove the clear layer.

​